Red Oak Retro-Fit Stair Tread

Red Oak Retro-Fit Stair Tread
$26.63
as configured
Current stock: 0
Stain None Selected

Note: Stain options are shown on specified wood types. Stain color and grain figure may vary from what your screen displays.

Stain Match
Need a different
size/configuration?

The Hardwood Lumber Company manufactures high quality retrofit stair treads and at affordable prices. You will be very happy with the quality of our red oak retrofit stair treads. Our retrofit stair treads are milled with new state of the art equipment. We can make the retrofit stair treads with a left or right hand return. Or we can make them with a double end return to any length. Red oak retrofit stair treads are available in standard sizes or can be custom made to your specifications. Retrofit stair treads are also available in almost any other hardwood species. Retrofit stair treads are also available in almost any other hardwood species. Custom size retrofit stair treads can also be made. We offer various texture options on our retrofit stair treads including, handscraped, wire brushed, sawcut, and distressed. All our wood stair parts including retrofit stair treads and risers can be ordered unfinished or prefinished with tread coat, a very durable two-component, commercial grade conversion varnish specifically made for high traffic ares. We can also stain your wood stair treads and risers with a standard stain color or apply a custom stain of your choice. We also provide stain match service. Choose from our standard sizes or contact us for a custom wood stair tread quote. Our standard stair treads are a full 1" thick. Each return is 1-1/4" wide and extends 1-1/2" past back side of the tread. left or right return is determined by standing at bottom of the stairs looking up. Stair treads and risers over 48" long may be slightly oversize with uneven ends.

Retrofit stair treads are made to fit over your existing stairs. Our retrofit stair treads have a 1" thick bullnose with a 1-1/4" overhang. The body is 3/4" thick.

All sizes are overall, including the return(s). For example, a single return 36" tread will have a 34-3/4" throat size, a double return 48" tread will have a 45-1/2" throat size.

All wood stair parts are custom made to order. Unfinished wood stair parts ship in 2 to 3 weeks. Prefinished wood stair parts ship in 3 to 4 weeks.

Red Oak

The sapwood of red oak is white to light brown and the heartwood is a pinkish reddish brown. red oak is similar in general appearance to white oak, but with a slightly less pronounced figure due to the smaller rays. Red oak is mostly straight-grained, with a coarse texture. Red oak can be stained with a wide range of finish tones and has great wear-resistance. We use only the higher quality grades of red oak lumber for our products.

5 Reviews

4/5
Michael Ireland Jul 28th 2018

RED OAK RETRO-FIT STAIR TREAD

Ordered thirteen, all were perfect except one and used it as the bottom stair. The way one person see the grain is different than the next. Great job, will be ordering thirteen more.

5/5
Alan Bitonti Jul 21st 2018

Red Oak retro-fit stair treads

These were ordered to be placed over an existing pine staircase that was once carpeted. I purchased both double return treads and plain end treads and both came to me in perfect condition, stained beautifully. I paired these with poplar stair risers purchased at the same time and everything went together just great.

Add a Review